the flex and the stiff
..."parabolic" stringer thruster with: kick tail; fins with special template; flat to concave to flat bottom; domed deck; tucked edge rail all the wayspeed finished
for a junior champ
posted by reverb at 3:06 PM
Wednesday, March 10, 2010
..."parabolic" stringer thruster with: kick tail; fins with special template; flat to concave to flat bottom; domed deck; tucked edge rail all the wayspeed finished
for a junior champ
check the ARCHIVES and you ll see all the photos.
All boards are 100% handcrafted since mid ´80s by one person from start to finish; including silk screening, fins and everything in between. Only functional tested shapes not trendy boards on works. The norm is to discontinue the templates that do not perform as expected.
All boards are 100% handcrafted since mid ´80s by one person from start to finish; including silk screening, fins and everything in between. Only functional tested shapes not trendy boards on works. The norm is to discontinue the templates that do not perform as expected.
yeah..a bit of music is always good
Previous Posts
- working
- hatchet
- o´ fish
- pinstripe log
- shaped shapes
- sea life aqua thruster
- a single with muscles
- champ
- deep Blue
- ...meanwhile in Bali
6 Comments:
I like the wide cut laps. Are you spraying your finishes?
...are not wide cutlaps
those are stringers
most are sprayed
except the acid swirls, pigments
this one was sprayed
thanks
I meant, are you spraying your "Speed finishes"?
And if you didn't cut the laps to extend over the parobolics, did you do your swirls/pigment as foam stain color flow instead of during lamination?
Amiable dispatch and this post helped me alot in my college assignement. Thanks you as your information.
nicely done - as usual;)
...hello man,
speed finishes were/are always sprayed
the other stuff not sprayed that some call sf are useless
as in the other comment, this one was totally sprayed on foam
-hey Royal,
thanks
Post a Comment
<< Home