another customer surfing

...sent me only these pictures of this board (I d painted 3 boards with the same design, this is the thruster one) surfing those steepers
not so good definition (you need to get a sharp eye to see the board colors in that wave..), but great moments

thruster egg

...the pictures are not sharp because I took them with a "film" camera and then in the scanning they lost definition

rolled to flat to V bottom; rolled deck; kick tail; 60/40 s full rails to hard on tail; thicker fins intended to surfing gutless conditions; speed finish coat; MDI foam; lighter glass work

good ole wood fins

just finished rough foiling several Okume fins; then with a finer grit I round a bit more some parts near the points, curved parts, etc
-in this case, the outer sides have a more flatter foil near the base

before

I just post these pict because 90% of the leash plugs are fitted after the H Coat
but sometimes is better to do this before